Current site: Peikko Australia. Do you want to change country or language?

JENKA Long Inserts

JENKA Long Inserts are used in applications where sufficient anchoring depth is available. JENKA Inserts are ideal for all types of lifting operations. JENKA Long Inserts can be used for all load directions.

JENKA Long Inserts are used in concrete elements such as beams and walls, where sufficient anchoring depth is available. The minimum compressive strength of the concrete upon load application is 15 MPa. Diagonal pull between 12.5° and 45° and lateral pull at up to 90° (resulting from tilting-up) are only permitted with additional reinforcement. Standard JENKA products are always delivered galvanized. All JENKA Long Inserts are CE-marked according to the Machinery Directive 2006/42/EC. JENKA Lifting Inserts with customized lengths for special purposes are available upon request.

Model options

CSA & ESA

Cross-hole inserts are shorter and can be used in a wide range of concrete elements. Anchoring is achieved by additional rebar.

Dimensions

* Fs= Allowed load force from 0º - 45º
* Fq= Allowed load force at 90º
(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)

Detailed technical information

Comprehensive product information and detailed information on product characteristics, resistances and required operating conditions are available on product’s Technical Manual.

Model options

SRA, WAL & TF

SRA Inserts with straight rebar are especially designed for long, thin elements to ensure smooth load impact. WAL Inserts with wavy rebar can be used in elements with compact geometry, such as beams or walls, and other elements with sufficient anchorage length. TF Lifting Inserts with forged rebar head require elements where concentrated loads can be applied.

Dimensions

* Fs= Allowed load force from 0º - 45º
* Fq= Allowed load force at 90º
(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)

Detailed technical information

Comprehensive product information and detailed information on product characteristics, resistances and required operating conditions are available on product’s Technical Manual.

Model options

SRASW

SRASW Inserts are special lifting inserts designed to lift and transport sandwich elements. The bending transfers the anchoring closer to the element’s center of gravity, enabling the element to be lifted in a more vertical position.

Detailed technical information

Comprehensive product information and detailed information on product characteristics, resistances and required operating conditions are available on product’s Technical Manual.

Contact us

Trent Davis

Managing Director

Tel. +61 (2) 96 222 226
Mob. +61 (0) 451 265 121
trent.davis@peikko.com