Current site: Peikko Australia. Do you want to change country or language?

JENKA Short Inserts

JENKA Short Inserts are used in applications with limited anchoring depth, such as slabs. These inserts transfer the anchoring loads horizontally to the slab.

JENKA Short Inserts are used in concrete elements with limited anchoring depth, such as concrete slabs. The use of JENKA Short Inserts requires a minimum level of reinforcement in the concrete elements defined by structural design. The minimum compressive strength of the concrete upon load application is 15 MPa. JENKA Short Inserts are not intended for tilt-up processes, and the load angle is limited to 45°. Standard JENKA products are always delivered galvanized. All JENKA Short Inserts are CE-marked according to the Machinery Directive 2006/42/EC.

Model options

WAS, BSA

JENKA WAS and BSA Inserts are used in flat elements such as slabs. They require no additional reinforcement other than normal surface reinforcement. 

Dimensions

* Fs= Allowed load force from 0º - 45º
(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)

Detailed technical information

Comprehensive product information and detailed information on product characteristics, resistances and required operating conditions are available on product’s Technical Manual.

Model options

PSA

PSA inserts are designed to fit into very flat and slim elements. Therefore, they require anchoring bars in addition to surface reinforcement. The anchoring bars must run in pressure contact with the base steel plate.

Dimensions

* Fs= Allowed load force from 0º - 45º
(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)

Detailed technical information

Comprehensive product information and detailed information on product characteristics, resistances and required operating conditions are available on product’s Technical Manual.

Model options

PLA

PLA is a slab insert with forged rebar head like the TF but has a stainless steel socket making it optimal for outdoor applications.

Detailed technical information

Comprehensive product information and detailed information on product characteristics, resistances and required operating conditions are available on product’s Technical Manual.

Contact us